Manual

[SHOOTING GUIDE]

Message is displayed when this unit is moved rapidly.

• Change the mode to _.

: [RECORD SETUP]

[SHOOTING GUIDE] _ [ON]

When "CAMERA PANNING IS TOO FAST." appears,

move the unit slowly while recording.

• Set to [OFF] to turn off the message indication.

• Message will not appear while pausing the recording. (Message will appear even if it is

pausing the recording if [DEMO MODE] is set to [ON].)

• In some recording conditions, messages may not appear.

[WIND NOISE CANCELER]

This will reduce the wind noise coming into the built-in microphones while maintaining the

realism.

• Change the mode to

• Switch to Manual Mode. (-> 74)

: [RECORD SETUP] _ [WIND NOISE CANCELER] _ [ON] I

• When switching to intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and

the setting cannot be changed.

• You may not see the full effect depending on the recording conditions.

[ZOOM MIC]

Directivity of the microphone is synchronized with the zoom operation. Sounds near the front

of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are

recorded more realistically if you zoom out (wide angle).

• Change the mode to

• Switch to Manual Mode. (-> 74)

: [RECORD SETUP] _ [ZOOM MIC] _ [ON] I

VQT2M51