Manual

[MIC LEVEL]
When recording, the input level from the built-in microphones can be adjusted.
Change the mode to
_11
Switch to Manual Mode. (-) 74)
1 Select the menu.
: [RECORD SETUP] _ [MIC LEVEL] _ desired setting I
[AUTO]: AGC is activated; and the recording level is adjusted
automatically.
[SET-I-_]/[SET]: -i-he desired recording level can beset.
2 Touch [_/[_ to adjust the microphone input
level.
Touch _ to activate/disactivate AGC.
When AGC is activated, the icon is surrounded by
yellow and the amount of sound distortion can be
reduced. When AGC is disactivated, natural recording
can be performed.
Adjust the microphone input level so that the last 2 bars O Left
of the gain value are not red. (Otherwise, the sound is Q Right
distorted.) Select a lower setting for microphone input _ Microphone input level
level.
3 Touch [ENTER] to determine the microphone
input level and then touch [EXIT].
u : }|lllll!li(Microphone input level meter) appears on the screen.
When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot be
changed.
When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.
The microphone input level meter shows the larger of the inputs from the 2 built-in
microphones.
You cannot record with the audio completely muted.
68
VQT2M51