Manual

[HI-SPEED BURST]
Recording is done continuously at the rate of 30 or 60 still pictures per second.
Use this function to record an object with fast movement.
• Change the mode to O •
1 Select the menu.
: [PICTURE]
[HI-SPEED BURST] _ desired setting
[OFF]:
Cancel the setting.
[30 frames/sec]:
90 still pictures are recorded continuously
at the rate of 30 per second.
The picture size is _ (1920x1080L
[60 frameslsec]:
180 stil pictures are recordec
continuously at the rate of 60 per second.
The picture size is _ (1280×720),
2 Press the O button.
• _ flashes in red during recording.
• First press the _ button halfway, then
press it fully to set the focus and record. It
will automatically focus if you press fully
once, so it is convenient when recording
objects moving back and forth.
3 Touch [Record] or [Delete].
4 (Only when [Record] is selected in step 3)
Touch [REC ALL] or [SELECT].
[REC ALL]: All pictures are stored.
[SELECT]: Pictures are stored by
specifying range.
5 (Only when [SELECT] is selected in
step 4)
Touch the range of pictures that
will be stored.
O Start point*
Q Finish point
• Previous (Next) page is displayed by
touching [_/[_ .
* Only select the picture for start point if only
1 picture is to be stored.
• A confirmation message is displayed
when [Enter] is touched after selecting the
start point and finish point.
Touch [YES] to store the pictures.
[Record]: Pictures are stored.
[Delete]: All pictures are deleted.
• If you turn off the power or change the mode, this function is canceled.
• The maximum number of times you can record on a media is 15.
(In the case of SD cards it is the maximum number of recordable scenes per card.)
• Color balance and brightness on the screen may change with some light sources such as
fluorescent lamps.
• image quality is different from ordinary still picture recording.
72
VQT2M51