Manual
ShutterSpeed:
Adjustitwhenrecordingfast-movingsubjects.
Iris:
Adjustitwhenthescreenistoobrightortoodark.
• Press the iA/MANUAL button to switch to Manual Mode. (-_ 74)
/ Touch [SHTR] or [IRIS].
2 Touch _/_ to adjust
settings.
s.T.____.Shutter speed:
1/60 to 118000
• If [AUTO SLOW SHTR] is set to [ON], the
shutter speed will be set between 1/30
and 1/8000. •
• The shutter speed closer to 1/8000 is
faster.
• The shutter speed will be set between 1/2
and 1/2000 in Still Picture Recording Mode.
m
,.,..._sIris/Gain value:
CLOSE _ (F16 to F2.0) _ OPEN _ (0dB
to 18dB)
• Value closer to [CLOSE] darkens the
image.
• Value closer to [18dB] brightens the
image.
• When the iris value is adjusted to brighter
than [OPEN], it changes to the gain value.
• To return to auto setting, press the iA/
MANUAL button again.
• When setting both the shutter speed and
the iris/gain value, set the shutter speed
and then set the iris/gain value.
I VIDEOIIPHOTOI
Manual shutter speed adjustment
• When the shutter speed is set lower than
1/15 in the Still Picture Recording Mode,
using a tripod is recommended. Also,
white balance cannot be set. The shutter
speed will be set to 1/30 when the power
is turned on again or when the Quick start
is performed.
You may see a band of light around an
object that is shining very bright, or highly
reflective.
• During normal playback, image movement
may not look smooth.
• If you record an extremely bright object or
record under indoor lighting, color and
screen brightness may change or a
horizontal line may appear on the screen.
In this case, record in the intelligent Auto
Mode or set the shutter speed to 1/60 in
areas where the power supply frequency
is 60 Hz, or 1/100 in areas of 50 Hz.
Manual iris/gain adjustment
• If the gain value is increased, the noise on
the screen increases.
• Depending on the zoom magnification,
there are iris values that are not displayed.
76
VQT2M51