Camera-Recorder Operating Instruction HDC27H

23
Power supply (continued)
Using the Panasonic battery pack
3
Connect the plug on the battery pack to the
connector inside the case, and insert the battery
pack.
<Note>
Before connecting or disconnecting the plug, be
absolutely sure to turn off the unit’s power.
1
Remove the battery holder.
2
Attaching the battery case to the unit.
1 Connect the cable on the camera-recorder to
the cable on the battery case (BP-90 type).
2 Using a screwdriver, secure the battery case
(BP-90 type) to the camera-recorder.
Open the cover and lift the rubber cap so that
the screw tightening hole is visible. Tighten the
screws to secure the battery case to the
camera-recorder. Be sure to fully tighten the
screws.
<Notes>
O Do not use excess force when lifting the rubber
caps forcibly.
O Take special care not to pinch the cable.
4
Set the battery type.
Select the battery type using the BATTERY
SELECT menu item. This item is selected from the
<BATTERY/TAPE> screen.
For details, refer to “Setting menu screens” (page
117).
Connect
Battery case
(for BP-90 type)
01. 英(表1-25) 05.5.18 10:38 ページ23