Camera-Recorder Operating Instruction HDC27H

34
Adjusting the viewfinder (The viewfinder is an optional accessory.)
Attaching the viewfinder and
adjusting its position
The viewfinder’s position can be adjusted in the front-
back and left-right directions so that what appears on
its screen inside can be seen most easily.
Attaching the viewfinder and adjusting its
position
1
Connect the viewfinder’s plug to the viewfinder
connector.
2
Loosen the viewfinder left-right position anchoring
ring.
3
While pulling up the viewfinder stopper, attach the
viewfinder by sliding it in the direction of the arrow.
Adjusting the viewfinder’s left-right
position
1
Loosen the viewfinder left-right position anchoring
ring.
2
Slide the viewfinder to the left or right, and adjust it
to a position that allows easy viewing.
3
Tighten the viewfinder left-right position anchoring
ring.
Viewfinder
stopper
Viewfinder left-right
position anchoring
ring
Loosen the ring.
Tighten the ring.
Adjusting the viewfinder’s front-back
position
1
Loosen the viewfinder front-back position
anchoring ring.
2
Slide the viewfinder to the front or back, and adjust
it to a position that allows easy viewing.
3
Tighten the viewfinder front-back position
anchoring ring.
Viewfinder front-back position anchoring ring
Removing the viewfinder
2
While pulling up the viewfinder stopper, remove the
viewfinder by sliding it in the direction of the arrow.
3
Release the viewfinder cable and mic cable from
the cable clamps, and disconnect the cables.
1
Loosen the viewfinder left-right position anchoring
ring.
Viewfinder
stopper
Tighten the ring.
02. 英(P26-88) 05.5.18 10:42 ページ34