Camera-Recorder Operating Instruction HDC27H

36
Audio input preparation (continued)
1
Remove the screws used to attach the mic holder.
5
Connect the microphone’s connecting cable to the
MIC IN jack on the camera.
6
Set the AUDIO IN switch or switches to “FRONT”
in accordance with the audio channel or channels
whose sound is to be recorded.
Attaching the AJ-MH800G mic holder (optional
accessory)
When attaching a microphone to
the main unit for use
MIC IN jack
AUDIO IN switches
2
Attach the microphone holder (AJ-MH800G) to the
camera recorder using the the 2 screws included.
Screws provided with mic holder
Locking screw
3
Attach the microphone to the microphone holder
and tighten the locking screw.
Locking lever
4
Loosen the locking lever and adjust the
microphone angle then tighten the locking lever
again.
02. 英(P26-88) 05.5.18 10:42 ページ36