Operation Manual

126
VQT2U82
∫ If scenes do not change smoothly when played back on another
device
The images may be still for several seconds at the joins between the scenes if the following
operations are performed when multiple scenes have been continuously played back using
another unit.
≥ Just how smoothly the scenes will be played back depends on the playback unit.
Depending on the unit used, the images may stop moving and become still for a moment
even when none of the following conditions are applicable.
≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at
every 4 GB of data when played back with another device.
≥ It may not play back smoothly when the editing of scenes was done with the
HD Writer AE 2.1, but it will play back smoothly if you set the seamless settings in the
HD Writer AE 2.1. Refer to the operating instructions for the HD Writer AE 2.1.
Problem Check points
When this unit is
connected to a TV in
still picture recording
mode, the picture on
the TV may appear
grainy.
≥ This is not a malfunction and does not affect the still
pictures being recorded or played back.
Principal reasons for not playing back smoothly
≥ When the scenes were recorded on different dates
≥ When scenes lasting under 3 seconds have been recorded
≥ When PRE-REC was used for recording
≥ When the interval recording is used
≥ When deleting scenes
≥ When selected scenes are copied to a disc in a connected DVD burner.
≥ When scenes recorded more than 99 scenes on the same date
HDC-SD600EB-VQT2U82_mst.book 126 ページ ２０１０年４月１５日 木曜日 午後３時２分