Operation Manual

VQT2U82

Select the desired method of HDMI output.

≥ [AUTO] determines the output resolution automatically based on information from the

connected TV.

If the images are not output on the TV when the setting is [AUTO], switch to the method

[1080p], [1080i] or [576p] which enables the images to be displayed on your TV. (Please

read the operating instructions for the TV.)

≥ Image will not display on TV for a few seconds in the following cases.

jWhen the 1080/50p recording mode is turned on/off during motion picture recording

mode

jWhen [CHANGE VIDEO] is touched during motion picture playback mode

AV multi connector output setting can be changed.

Changing the component output setting

Connecting with a HDMI mini cable

: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p]

Connecting with the AV multi cable

: [SETUP] # [AV MULTI] # desired setting

[COMPONENT]: When connecting to the component terminal

[AV OUT]: When connecting to the video terminal

: [SETUP] # [COMPONENT OUT] # desired setting

[576i]: When connecting to the component terminal on the TV compatible with 576i.

(Playback is in standard quality.)

[1080i]: When connecting to the component terminal on the TV compatible with

1080i.

(Playback is in high definition quality.)

HDC-SD600EB-VQT2U82_mst.book 92 ページ２０１０年４月１５日　木曜日　午後３時２分