Datasheet
JW
1
ds_61128_0000_en_jw: 151106D
SPECIFICATIONS
COMPACT PC BOARD
POWER RELAY
JW RELAYS
VDE
mm inch
FEATURES
• Miniature package with universal
terminal footprint
• High dielectric withstanding for
transient protection:
10,000 V surge in µs between coil
and contact
• Sealed construction
• Class B coil insulation types
available
• TV rated (TV-5) types available
(only for 1 Form A type)
• VDE, TÜV, SEMKO, SEV, FIMKO, TV-5
also approved
About Cd-free contacts
We have introduced cadmium-free type
products to reduce environmentally
hazardous substances. Please replace
parts that contain cadmium with Cd-free
products. Evaluate them with your actual
application before use because the life of
a relay depends on the contact material
and load.
Note: Add the suffix “F” to the part
number for the 1 Form A contact type.
The 1 Form C, 2 Form A and 2 Form C
contact types were originally Cd-free,
hence the suffix “F” is not required.
20.0
.787
12.8
.504
28.6
.1.126
Contact
Coil
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
Remarks
* Specifications will vary with foreign standards certification ratings.
*
1
Detection current: 10mA
*
2
Wave is standard shock voltage of ±1.2 × 50μs according to JEC-212-1981
*
3
Excluding contact bounce time
*
4
Half-wave pulse of sine wave: 11ms; detection time: 10μs
*
5
Half-wave pulse of sine wave: 6ms
*
6
Detection time: 10μs
*
7
Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (p. 19, Relay Technical Information).
*
8
When using relays in a high ambient temperature, consider the pick-up voltage
rise due to the high temperature (a rise of approx. 0.4% V for each 1°C 33.8°F
with 20°C 68°F as a reference) and use a coil impressed voltage that is within the
maximum allowable voltage range.
Characteristics
Standard type High capacity type
Arrangement
1 Form A, 1 Form C,
2 Form A, 2 Form C
1 Form A, 1 Form C
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
100 m
Ω
Contact material AgSnO
2
type
Rating
(resistive
load)
Nominal switching
capacity
5 A 250 V AC,
5 A 30 V DC
10 A 250 V AC,
10 A 30 V DC
Max. switching
power
1,250 VA, 150 W 2,500 VA, 300 W
Max. switching
voltage
250 V AC, 30 V DC
Max. switching
current
5 A 10 A
Min. switching
capacity
#1
100 mA, 5 V DC
Expected
life (min.
ope.)
Mechanical
(at 180 cpm)
5
×
10
6
Electrical (at 6 cpm)
(Resistive load)
10
5
Nominal operating power 530 mW
Standard type High capacity type
Max. operating speed
(at rated load)
6 cpm
Initial insulation resistance Min. 1,000 M
Ω
at 500 V DC
Initial
breakdown
voltage*
1
Between open
contacts
1,000 Vrms for 1 min.
Between contacts
and coil
5,000 Vrms for 1 min.
Between contact
sets
3,000 Vrms for 1 min. (2 Form A, 2 Form C)
Initial surge voltage between
contacts and coil*
2
Min. 10,000 V
Operate time*
3
(at nominal voltage)
Max. 15 ms
Release time (without diode)*
3
(at nominal voltage)
Max. 5 ms
Temperature rise (at 20°C)
(at nominal voltage)
(with nominal coil voltage and
at nominal switching capacity)
1a: max. 39
°
C
1c, 2a, 2c: max. 55
°
C
(resistance method)
1a: max. 45
°
C
1c: max. 55
°
C
(resistance method)
Shock
resistance
Functional*
4
Min. 98 m/s
2
{10 G}
Destructive*
5
Min. 980 m/s
2
{100 G}
Vibration
resistance
Functional*
6
Approx. 98 m/s
2
{10 G}, 10 to 55 Hz
at double amplitude of 1.6 mm
Destructive
Approx. 117.6 m/s
2
{12 G}, 10 to 55 Hz at
double amplitude of 2.0 mm
Conditions for operation,
transport and storage*
7
(Not freezing and
condensing at low
temperature)
Ambient
temp.*
8
–40
°
C to +85
°
C –40
°
F to +185
°
F
Humidity 5 to 85% R.H.
Unit weight Approx. 13 g .46 oz