User manual

6.4.4 Interface Specifications (GT03-E)
Interface for connecting PLC/External devices
- COM port
Item
Specifications
AIG03MQ03DE
AIG03TQ13DE
AIG03MQ05DE
AIG03TQ15DE
Communication standard Conforms to RS232C (Non
insulation type)
Conforms to RS422 (Non
insulation type)
Communication
condition with
external
devices
Baud rate (bit/s)
9600, 19200, 38400, 57600, 115200 bps
Data length (bit)
7, 8
Parity
None, Odd, Even
Stop bit (bit)
1
Transmission distance
(Total length)
Max. 15 m
(Baud rate: 19200 bit/s)
Max. 500 m
(Baud rate: 115200 bit/s)
Protocol
-
MEWTOCOL (Protocol for our PLC: FP series)
- MEWTOCOL7 (Protocol for our PLC: FP7 series)
- General-purpose serial (PANASONIC dedicated protocol)
- Other companies' PLC protocols (For the details, refer to the latest
GTWIN HELP.)
Connector
Connector terminal base (8-pin)
Note1) 2) 3)
Note1) The (+) and (-) terminals are the power supply terminals for driving the main unit.
Note2) Regarding power supply voltage, please pay due consideration to the cable length so that the
applied voltage is within the operation voltage range.
Note3) When tightening the terminal block requires a flat-blade screwdriver with a blade size of 0.4 x 2.5
or special screwdriver (part No.: AFP0806). The tightening torque should be 0.22 to 0.3 N⋅m.
Applicable wire
Size
Nominal cross-sectional area
Rated temperature
AWG#28 to 16
0.08 to 1.25mm2
60 °C
Interface for transferring screen data
- USB port
Item
Specifications
Communication standard
USB1.1
Connector shape
Note1)
TYPE-B
Trasmission distance
USB MiniB type 5pin (Male)
No. of connected unit with PC
1 unit
Note1) Take care of handling of the connector not to add an excessive static electricity on the metal part
of the connector.
SD memory card slot
Item
Specifications
Support media
SD memory card, SDHC memory card
Note1)
Supported format standard
Conforms to SD standard
Note2)
Note1) The manufacturer name that the operation check has done: Panasonic Corporation
Check the usable temperature range of a SD memory card to be used before use.
Note2) Please format with a format software for SD memory cards.
6-17