User Guide

2.10.7 Connecting a Cell Station to the PBX
Note
When connecting both
KX-TDA0155 and KX-TDA0158 CSs to the same card, the KX-TDA0158 CSs must
be connected to lower-numbered pins on the card than the KX-TDA0155 CSs.
Refer to the following examples to connect a CS to the PBX.
KX-TDA0155
D1
D2
Signal Name
DHLC/DLC card (Amphenol)
1
2
3
4
D1
D2
CS (RJ11)
Pin No.
Signal Name
Maximum Distance
222 m
347 m
500 m
Cable
ø 0.4 mm:
ø 0.5 mm:
ø 0.6 mm:
DHLC8 Card
Accessories and User-supplied Items for the CS
Accessories (included): Screws ´ 2, Washers ´ 2
User-supplied (not included): RJ11 connector
Note
For details about
DHLC card or DLC card, refer to "2.5.2 DHLC8 Card (KX-TDA0170)", "2.5.3 DLC8 Card
(KX-TDA0171)", or "2.5.4 DLC16 Card (KX-TDA0172)".
Installation Manual 229
2.10.7 Connecting a Cell Station to the PBX