User Guide

2.2.13 Floor Standing (KX-TDA200 Only)
CAUTION
• Do not block
the openings of the shelf. Allow space of at least 20 cm above and 10 cm at the sides of
the shelf.
• Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on the
back of the shelf will not be blocked.
• Make sure that the surface behind the shelf is not made of wood.
Notice
Be careful not to drop the shelf.
1. Install 4 anchor
plugs in the floor, using the metal bracket as a template. Fix the metal bracket with 4 screws
(A).
TOP
30 mm
8 mm
Floor
Screw (A) Metal Bracket
Anchor
Plug
Anchor
Plug
Hammer
Metal
Bracket
Screw (A)
2. Remove the front cover of the shelf (refer to "2.2.3 Opening/Closing the Front Cover
").
Installation Manual 69
2.2.13 Floor Standing (KX-TDA200 Only)