Operating Manual

To set forwarding status and outside destinations to ring in parallel for outside calls to an
ICD group
PT
Enter CO line access number
and then outside phone number.
FWD/DND
AUTO DIAL
STORE
Enter
4 to 7
.
Press the fixed
FWD/DND
button.
Press
STORE.
0
FWD off
(max. 32 digits)
outside
phone no.
CO line
access no.
While on-hook (when in FWD/DND Setting Mode)
AUTO DIAL
STORE
Press
STORE
to set.
OR
Enter 1.
A confirmation tone will
be heard.
FWD–All Calls
1
To cancel ringing
To set ringing
7
4
6
5
Virtual PS 1
Virtual PS 2
Virtual PS 3
Virtual PS 4
Enter 0.
Only one extension assigned as member 1 in each ICD group can perform the settings for
virtual PSs.
It is possible to switch the forwarding status (on/off) of a virtual PS by entering the number
(4–7) of that extension, then pressing the fixed FWD/DND button, instead of pressing the
AUTO DIAL/STORE button.
1.3.31 Hands-free Answerback
You can answer an incoming call without going off-hook as soon as the line is connected.
When
an intercom call arrives, you will hear the caller talking without the phone ringing. When
an outside call arrives, you will hear the caller talking after a preprogrammed number of rings.
Hands-free Answerback for outside calls requires System Programming.
Document Version 2013-05 Operating Manual 89
1.3.31 Hands-free Answerback