Operating instructions

2. Preparation
23
2.2 Turning the power
switch ON
Turn the power switch to the ON position (1).
Note:
L When you operate the unit right after turning
the power switch ON or after leaving the unit
unused for a long period of time, the scanner
lamp (2) will flash for a short while. The
scanner will also move instantaneously. This
is normal for the unit. After that, the scanner
lamp will remain ON (the default is for approx.
15 minutes, feature #403 on page 64).
2.3 Selecting the
operation mode
(Fax/Copy/Scan)
This unit has three operation modes. You can
select the desired mode by pressing the one of
the following buttons.
– {COPY}: Select this mode when using the
unit as a copy machine (page 45).
– {FAX}: Select this mode when using the unit
as a fax machine (page 29).
– {SCAN}: Select this mode when using the
unit as a scanner for the computer (page 55).
Note:
L The default operation mode is the copy
mode.
You can change the default operation mode
(feature #463 on page 64) and the timer
before returning to the default operation
mode (feature #464 on page 64).
1
2
FLB851E-PFQX2329ZA-en.book Page 23 Friday, December 16, 2005 3:12 PM