Operating instructions

2. Preparation
26
2.7 Your logo
The logo can be your name or the name of your
company.
1 Press {MENU}.
SYSTEM SETUP
PRESS [()]
2 Press {#}, then {1}{0}{2}.
YOUR LOGO
PRESS SET
3 Press {SET}.
L The cursor (|) will appear on the display.
LOGO=|
4 Enter your logo, up to 30 characters. See the
following character table for details.
5 Press {SET}.
SETUP ITEM [ ]
6 Press {MENU} to exit.
Note:
L Your logo will be printed on the top of each
page sent from your unit.
To select characters with the dial keypad
Note:
L To enter another character that is located on
the same dial key, press {>} to move the
cursor to the next space.
To enter your logo
Example: “BILL”
1. Press {2} 2 times.
LOGO=|B
2. Press {4} 3 times.
LOGO=B|I
3. Press {5} 3 times.
LOGO=BI|L
4. Press {>} to move the cursor to the next
space and press {5} 3 times.
LOGO=BIL|L
To change uppercase or lowercase letters
Pressing the {#} key will change to uppercase
or lowercase alternately.
1. Press {2} 2 times.
LOGO=|B
2. Press {4} 3 times.
LOGO=B|I
Keypad Characters
{1} 1[]{}+–/=
,._`:;?|
{2} ABCabc2
{3} DEFdef 3
{4} GHI ghi 4
{5} JKLj kl 5
{SET}{R}
{<}{>}{V}{^}
{MENU}
{CLEAR}{ZOOM}/{QUICK SCAN}
{6} MNOmno6
{7} PQRSpqr s7
{8} TUVt uv 8
{9} WXYZwxyz9
{0} 0()<>!"#$
%& ¥ @ @^ ’ →
{#} To change uppercase or
lowercase letter.
{R} Hyphen
{ZOOM}/
{QUICK
SCAN}
To insert a space.
{CLEAR} To delete a digit.
Keypad Characters
FLB851E-PFQX2329ZA-en.book Page 26 Friday, December 16, 2005 3:12 PM