Operating instructions

3. Fax
31
L To send a single page, skip to step 10.
L To send multiple pages, go to the next
step.
7 Press {QUICK SCAN} to scan the document
into memory.
Example: PAGES=01 01%
STANDARD
u
SCAN:PRESS SET
SEND:PRESS START
8 Place the next page on the scanner glass.
9 Press {SET}.
L To send more pages, repeat steps 8 and
9.
10 Press {START}.
To stop sending
Press {STOP}.
3.3 Document
requirements
3.3.1 Using the auto document
feeder
Minimum document size
Maximum document size
Effective scanning area
L Shaded area will be scanned.
Document weight
L Single sheet:
45 g/m
2
to 90 g/m
2
L Multiple sheets:
60 g/m
2
to 80 g/m
2
3.3.2 Using the scanner glass
Effective scanning area
L Shaded area will be scanned.
3.3.3 Note for the auto document
feeder and the scanner glass
L Check that ink, paste or correction fluid has
dried completely.
L To set a document with a width of less than
210 mm, we recommend using the scanner
glass to copy the original document onto A4
or letter-sized paper, then setting the copied
document.
L Do not set documents that do not satisfy the
requirements of size and weight when using
the auto document feeder. Make a copy of
the document using the scanner glass and
set the copy.
L Remove clips, staples or other fasteners
when using the auto document feeder.
L Do not set the following types of documents
when using the auto document feeder: (Make
128 mm
128 mm
600 mm
216 mm
216 mm
208 mm
4 mm 4 mm
4 mm
4 mm
208 mm
287
mm
5 mm 5 mm
4 mm
4 mm
FLB851E-PFQX2329ZA-en.book Page 31 Friday, December 16, 2005 3:12 PM