Operating instructions

7. Programmable Features
63
7.3 Basic features
{#}{1}{0}{1} Setting the date and time
SET DATE & TIME
PRESS SET
Enter the date and time using the dial keypad.
See page 25 for details.
{#}{1}{0}{2} Setting your logo
YOUR LOGO
PRESS SET
Enter your logo using the dial keypad. See page
26 for details.
{#}{1}{0}{3} Setting your fax number
YOUR FAX NO.
PRESS SET
Enter your fax number using the dial keypad.
See page 28 for details.
{#}{1}{2}{1} Setting recall time
SET RECALL TIME
=100ms [V^]
The recall time depends on your telephone
exchange or host PBX.
{0} “900ms”
{1} “700ms”
{2} “600ms”
{3} “400ms”
{4} “300ms”
{5} “250ms”
{6} “200ms”
{7} “160ms”
{8} “110ms”
{9} “100ms” (default)
{*} “90ms”
{#} “80ms”
Note:
L If the unit is connected via a PBX, PBX
functions (transferring a call, etc.) might not
work correctly. Consult your PBX supplier for
the correct setting.
{#}{1}{4}{5} Changing the LCD display
contrast
LCD CONTRAST
=NORMAL [V^]
{1} “NORMAL” (default): For normal contrast.
{2} “DARKER”: Used when the display contrast
is too light.
{#}{1}{6}{1} Setting the ringer pattern
RINGER PATTERN
=A [V^]
{1} “A” (default)
{2} “B”
{3} “C”
{#}{2}{1}{0} Changing the ring setting in
FAX ONLY mode
FAX RING COUNT
RINGS=2 [V^]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
{1} “1”
{2} “2” (default)
{3} “3”
{4} “4”
{5} “5”
{6} “6”
{7} “7”
{8} “8”
{9} “9”
Note:
L If you are using the unit with an answering
machine, set to more than 4 (page 39).
{#}{2}{1}{6} Setting the Caller ID list to print
automatically
AUTO CALL. LIST
MODE=OFF [V^]
{0} “OFF” (default): The unit will not print the
Caller ID list, but will keep records of the
information for the last 30 callers.
{1} “ON”: The unit will print the Caller ID list
automatically after every 30 new calls (page 42).
{#}{3}{2}{2} Enabling remote operation for
a telephone answering machine
REMOTE TAM ACT.
MODE=OFF [V^]
If you are using the unit with an answering
machine, activate this feature, and program the
remote activation ID to retrieve recorded voice
messages.
Important:
L The remote activation ID must be the
same as the code that you programmed
on the answering machine for remote
operation. Also, it must be different from
the fax activation code (feature #434 on
page 66).
{0} “OFF” (default)
{1} “ON”
FLB851E-PFQX2329ZA-en.book Page 63 Friday, December 16, 2005 3:12 PM