Operating instructions

7. Programmable Features
64
1. Press {MENU}.
2. Press {#}, then {3}{2}{2}.
3. Press {1} to select “ON”.
4. Press {SET}.
5. Enter your ID from 1 to 5 digits, using 0–9,
{*} and {#}.
L The default ID is “11”.
6. Press {SET}.
7. Press {MENU}.
{#}{3}{8}{0} Setting the recording paper
size in the paper input tray
PAPER SIZE #1
=A4 [V^]
{1} “LETTER”: Letter size paper
{2} “A4” (default): A4 size paper
Note:
L If you change the paper size by using
{PAPER TRAY} in the copy mode (page 46),
the paper size set by this feature will be
changed.
{#}{3}{8}{1} Setting the recording paper
size in the multi-purpose input tray
PAPER SIZE #2
=A4 [V^]
{1} “LETTER”: Letter size paper
{2} “A4” (default): A4 size paper
{3} “LEGAL”: Legal size paper
Note:
L If you change the paper size by using
{PAPER TRAY} in the copy mode (page 46),
the paper size set by this feature will be
changed.
{#}{3}{8}{2} Setting the recording paper
size in the optional input tray
L This feature will be displayed only when the
optional input tray is installed.
PAPER SIZE #3
=A4 [V^]
{1} “LETTER”: Letter size paper
{2} “A4” (default): A4 size paper
{3} “LEGAL”: Legal size paper
Note:
L If you change the paper size by using
{PAPER TRAY} in the copy mode (page 46),
the paper size set by this feature will be
changed.
{#}{4}{0}{3} Setting power save feature
POWER SAVE
=15min [V^]
To set the length of time before the unit enters
the power save mode.
{1} “5min”: 5 minutes
{2} “15min” (default): 15 minutes
{3} “30min”: 30 minutes
{4} “1h”: 1 hour
Note:
L During the power save mode, the scanner
lamp remains OFF.
{#}{4}{6}{2} Saving the previous contrast
setting
CONTRAST SAVE
MODE=OFF [V^]
{0} “OFF” (default): Deactivates this feature.
{1} “ON”: The unit will save the previous contrast
setting.
{#}{4}{6}{3} Setting the default operation
mode
DEFAULT MODE
=COPY [V^]
To select the default operation mode when the
selected time of the mode timer (feature #464)
passes.
{1} “COPY” (default): Copy mode is selected as
default.
{2} “FAX”: Fax mode is selected as default.
Note:
L You cannot select the scan mode using this
feature.
{#}{4}{6}{4} Setting the default operation
mode timer
MODE TIMER
=1min [V^]
To set the timer before returning to the default
operation mode (feature #463).
{0} “OFF”: Deactivates this feature.
{1} “30s”: 30 seconds
{2} “1min” (default): 1 minute
{3} “2min”: 2 minutes
{4} “5min”: 5 minutes
{#}{4}{8}{2} Setting toner save feature
TONER SAVE
MODE=OFF [V^]
{0} “OFF” (default): Deactivates this feature.
{1} “ON”: The toner cartridge will last longer.
FLB851E-PFQX2329ZA-en.book Page 64 Friday, December 16, 2005 3:12 PM