Operating instructions

7. Programmable Features
68
{#}{4}{4}{1} Setting the output tray to use
for faxing
FAX OUTPUT TRAY
=#3 [V^]
You can select the output tray that will be used
for printing received faxes.
{1} “#1”: Upper output tray (Up to approx. 100
sheets).
{2} “#2”: Middle output tray (Up to approx. 50
sheets).
{3} “#3” (default): Lower output tray (Up to
approx. 50 sheets).
Note:
L Lists or reports printed by pressing {HELP}
(page 24) or {MENU} (page 93) will be
stacked on the upper output tray.
{#}{4}{4}{2} Receiving a fax into the
computer assigned as the ADMIN PC
PCFAX SETTING
=CONNECTED [V^]
If you wish to receive a fax into the computer
assigned as the ADMIN PC, activate this feature
and select [PC FAX] from Multi-Function
Station.
{0} “OFF”: Deactivates this feature.
{1} “ALWAYS”: If the unit recognizes the
connection to the computer assigned as the
ADMIN PC, it will transfer a received document
to the computer. If the unit cannot recognize the
connection, it will store a received document in
the memory once, then transfer the data after
recognition of the connection.
{2} “CONNECTED” (default): If the unit
recognizes the connection to the computer
assigned as the ADMIN PC, it will transfer a
received document to the computer. If the unit
cannot recognize the connection, it will print out
the data.
{#}{4}{5}{9} Resetting fax features to their
default settings
SET FAX DEFAULT
RESET=NO [V^]
{0} “NO” (default)
{1} “YES”
To reset the fax features:
1. Press {MENU}.
2. Press {#}, then {4}{5}{9}.
3. Press {1} to select “YES”.
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
FLB851E-PFQX2329ZA-en.book Page 68 Friday, December 16, 2005 3:12 PM