Operating instructions

7. Programmable Features
69
7.5 Copy features
{#}{4}{6}{0} Setting the input tray to use for
copying
COPY INPUT TRAY
=#1 [V^]
You can select the input tray that will be used for
copying.
{1} “#1” (default): Paper input tray
{2} “#2”: Multi-purpose input tray
L When the optional input tray is installed, the
following will be displayed.
{1}: “#1”
{2}: “#2”
{3}: “#3”
{4}: “#1+#3” (default)
Note:
L When the input tray setting is set to “#1+#3”,
the paper size in the paper input tray (feature
#380 on page 64) and the optional input tray
(feature #382 on page 64) should be the
same. If either of the paper size is changed,
the input tray setting will be changed to “#1”
automatically.
{#}{4}{6}{1} Changing the default copy
resolution
COPY RESOLUTION
=TEXT/PHOTO [V^]
To change the default resolution setting for
copying.
{1} “TEXT/PHOTO” (default): For documents
containing both text and photographs.
{2} “TEXT”: For documents containing only text.
{3} “PHOTO”: For documents containing
photographs, shaded drawings, etc.
{#}{4}{6}{5} Setting the sort copy hold
SORT COPY HOLD
MODE=OFF [V^]
{0} “OFF” (default): Deactivates this feature.
{1} “ON”: When making more than 4 sets of
multiple copies, the unit will add a pause every 3
sets of copies.
Note:
L If you select “ON”, the unit will display the
following and stop copying after every 3 sets
of copies.
TO CONTINUE COPY
PRESS START
Remove the stacked paper, then press
{START} to restart copying.
{#}{4}{6}{6} Setting the output tray to use
for copying
COPY OUTPUT TRAY
=#1 [V^]
You can select the output tray that will be used
for copying.
{1} “#1” (default): Upper output tray (Up to
approx. 100 sheets).
{2} “#2”: Middle output tray (Up to approx. 50
sheets).
{3} “#3”: Lower output tray (Up to approx. 50
sheets).
Note:
L Documents printed from the computer will be
stacked on the upper output tray (“#1”). If
you use the computer frequently, we
recommend changing the output tray for
copying to the middle output tray (“#2”).
FLB851E-PFQX2329ZA-en.book Page 69 Friday, December 16, 2005 3:12 PM