Operating instructions

7. Programmable Features
70
7.6 Scan features
The following features will be displayed only
when the optional LAN board is installed.
For more details, see the network installation
guide by clicking on the link in the Multi-Function
help file.
{#}{4}{9}{0} Setting the default scan type
for LAN push scan
SCAN TYPE
=B/W TEXT [V^]
{1} “B/W TEXT” (default): For containing Black
and White text document
{2} “B/W GRAPHIC”: For containing Black and
White graphic image
{3} “B/W PHOTO”: For containing Black and
White photo image
{4} “COLOUR”: For containing colour image
{#}{4}{9}{1} Changing the default scan
resolution for LAN push scan
SCAN RESOLUTION
=300dpi [V^]
{1} “200dpi”
{2} “300dpi” (default)
{3} “600dpi”
{#}{4}{9}{2} Setting the default scan size for
LAN push scan
SCAN SIZE
=A4 [V^]
{1} “LETTER”: Letter size paper
{2} “A4” (default): A4 size paper
{3} “LEGAL”: Legal size paper
7.7 LAN features
The following features will be displayed only
when the optional LAN board is installed.
For more details, see the network installation
guide by clicking on the link in the Multi-Function
help file.
{#}{4}{4}{3} Setting the computer for PC fax
reception and remote control
ADMIN PC
PRESS SET
To select the computer that will be used for
receiving a fax or remote control settings for the
administrator.
You can select the name of computer on the LAN
or “USB HOST” (default).
Note:
L If the optional LAN board is not installed, the
computer connected to the unit by USB is
assigned as the ADMIN PC.
{#}{5}{0}{0} LAN setting with a DHCP
server
DHCP
=ENABLED [V^]
{0} “DISABLED”: Deactivates this feature.
{1} “ENABLED”(default): The following will be
allocated automatically using a DHCP (Dynamic
Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
{#}{5}{0}{1} Setting the IP address for the
LAN connection
IP ADDRESS
PRESS SET
This feature is available when feature #500 is
deactivated. Enter the IP address of the unit on
the LAN using the dial keypad.
{#}{5}{0}{2} Setting the Subnet mask for the
LAN connection
SUBNET MASK
PRESS SET
This feature is available when feature #500 is
deactivated. Enter the subnet mask of the
network on the LAN using the dial keypad.
{#}{5}{0}{3} Setting the Default gateway for
the LAN connection
DEFAULT GATEWAY
PRESS SET
This feature is available when feature #500 is
deactivated. Enter the default gateway of the
network on the LAN using the dial keypad.
{#}{5}{0}{7} Setting the machine name
MACHINE NAME
PRESS SET
Enter the name of the unit to recognize on the
LAN. If you change the name, assign the unique
name to avoid overlapping.
L In order to recognize the unit on the LAN, the
default name of the unit is assigned
automatically based on the ID of the optional
LAN board.
FLB851E-PFQX2329ZA-en.book Page 70 Friday, December 16, 2005 3:12 PM