Digital Camera Operating Instructions

15
(ENG) VQT2B45
About the menu operation
The camera comes with menus that allow you to set the settings for taking pictures and
playing them back just as you like.
In particular, the [SETUP] menu contains some important settings relating to the camera’s
clock and power. Check the settings of this menu before proceeding to use the camera.
In Recording Mode

In Playback Mode

1
[REC] menu
9
[PLAYBACK] menu
This menu lets you set the coloring, sensitivity,
or number of pixels, etc. of the pictures you are
recording.
This menu lets you make the protection or
print settings, etc. of recorded pictures.
e
[SETUP] menu
• This menu lets you perform the clock settings, select the operating beep tone settings and
set other settings which make it easier for you to operate the camera.
• Available in Recording or Playback Mode.
How to use the menu
1
Press [MENU/SET] to display the menu.
• You can switch menu screens by the page from
any menu item by rotating the zoom lever.
(Example: Selecting the Normal Picture Mode
[
1
])
2
Press
e
/
r
to select a menu item.
(Example: Selecting [AF MODE])
• You can move to the next page by pressing
r
at
the very bottom.
3
Press
q
.
• Depending on the item, the settings may not
appear or it may be displayed in a different way.
4
Press
e
/
r
to select a setting.
(Example: Selecting [
3
])
5
Press [MENU/SET] to confi rm your
setting.
6
Press [MENU/SET] to close the menu.

VQT2B45_DMC-FS42_P-PC_EN.indd 15VQT2B45_DMC-FS42_P-PC_EN.indd 15 2009/04/07 13:53:262009/04/07 13:53:26