User Guide

Preparation
21
VQT0X92
Attaching the Lens
Cap/Strap
∫ Lens Cap (supplied)
1 Attach the lens cap.
• When you turn the camera off, carry the
camera or play back the pictures, attach
the lens cap to protect the surface of the
lens.
• Detach the lens cap before turning on the
camera in the recording mode.
• Be careful not to lose the lens cap.
∫ Strap (supplied)
1 Pass the strap through the hole at
the strap eyelet.
2 Pass the strap through the
stopper and fasten the strap.
A: Pull the strap 2 cm or more.
• Attach the strap to the other side of the
camera being careful not to twist it.
• Check that the strap is firmly attached to
the camera.
• Attach the strap so that the “L
UMIX” LOGO
is on the outside.
VQT0X92.book 21 ページ ２００６年７月４日 火曜日 午前１０時３２分