User Guide

Preparation
28
VQT0X92
[CLOCK SET]
Press [ ] to display the [SETUP] menu
and select this item. (P27)
Change date and time. (P26)
[WORLD TIME]
Press [ ] to display the [SETUP] menu
and select this item. (P27)
[ ]: The time at your home area is
set.
[ ]: The local time at the travel
destination area is set.
• Refer to P73 for information about setting
[WORLD TIME].
[CUST. SET MEM.]
Press [ ] to display the [SETUP] menu
and select this item. (P27)
The current camera settings are registered
in [ ], [ ] or [ ]. (P62)
[MONITOR/VIEWFINDER]
Press [ ] to display the [SETUP] menu
and select this item. (P27)
Adjust the brightness of the LCD monitor
(when pictures appear on the LCD monitor)
or Viewfinder (when pictures appear on the
Viewfinder) in 7 steps.
[GUIDE LINE]
Press [ ] to display the [SETUP] menu
and select this item. (P27)
Set the pattern of the guide lines displayed
when taking pictures. (P45)
You can also set whether or not to have the
recording information and histogram
displayed when the guide lines are
displayed.
[REC. INFO.]: [ON]/[OFF]
[HISTGRAM]: [ON]/[OFF]
[PATTERN]: [ ]/[ ]
[TRAVEL DATE]
Press [ ] to display the [SETUP] menu
and select this item. (P27)
[SET]: When taking a picture, the date on
which it was taken is recorded.
[OFF]: When taking a picture, the date on
which it was taken it is not recorded.
• Refer to P71 for information about setting
[TRAVEL DATE].
[AUTO REVIEW]
Press [ ] to display the [SETUP] menu
and select this item. (P27)
[1SEC.]: The recorded picture
automatically appears on the
screen for about 1 second.
[3SEC.]: The recorded picture
automatically appears on the
screen for about 3 seconds.
[ZOOM]: The recorded picture automatically
appears on the screen for about
1 second. It is then enlarged
4 times and appears for about
1 second. This mode is useful for
confirming focus. Pictures
recorded using auto bracket or
burst mode and pictures with audio
are not enlarged even if [ZOOM] is
selected.
[OFF]: The recorded picture does not
automatically appear.
• The auto review function is not activated
in motion picture mode [ ].
• When pictures are recorded in auto bracket
(P53) or burst mode (P55), the auto review
function is activated regardless of the
setting on the auto review function. (The
picture is not enlarged.)
• The auto review function is activated while
pictures with audio (P89) are being
recorded regardless of its setting. (The
picture is not enlarged.)
• If the auto review function is activated
when [HIGHLIGHT] is set to [ON], any
white saturated areas on the picture
appear blinking in black. (P44)
• When the quality is set to [RAW], the auto
review function works until the end of recording
onto the card. (The picture is not enlarged.)
• The auto review setting is disabled when
using auto bracket or burst mode, in
motion picture mode [ ] or when
[AUDIO REC.] is set to [ON] or when the
quality is set to [RAW].
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
VQT0X92.book 28 ページ ２００６年７月４日 火曜日 午前１０時３２分