User Guide

Advanced
45
VQT0X92
• There may be white saturated areas if the
distance to the subject is too close when
taking pictures with the flash. White
saturated areas appear blinking in black.
∫ Brighten the LCD monitor for use
outdoors. (Power LCD)
Press and hold the [DISPLAY] button for
more than 1 second to activate the power
LCD function. The LCD monitor becomes
brighter than normal and it becomes easier
to use outdoors.
A: Power LCD indication
• While taking a picture, the LCD monitor
automatically returns to the normal
brightness if nothing is pressed for 30
seconds. Press any button to make the
LCD monitor bright again.
• If you press and hold the [DISPLAY]
button for 1 second again, the power LCD
function is deactivated and the LCD
monitor returns to the normal brightness.
• The brightness and the colors of the
pictures displayed on the LCD monitor are
adjusted when the power LCD function is
activated. Therefore, some subjects may
look different on the LCD monitor. However
this does not affect the actual recording.
∫ Recording Guide Line
When you align the subject on the
horizontal and vertical guide lines or the
cross point of these lines, you can take
pictures with well-designed composition by
viewing the size, the slope and the balance
of the subject.
A[]: This is used when dividing the
entire screen into 3k3 for taking
pictures with a well-balanced
composition.
B[]: This is used when you want to
position the subject at the exact
center of the screen.
DELETEEXIT
4X
REVIEW1X
ON : PRESS FOR 1SEC.
DISPLAY
3
P
P
3
VQT0X92.book 45 ページ ２００６年７月４日 火曜日 午前１０時３２分