User Guide

Advanced
49
VQT0X92
• The available flash range is an
approximation.
• Refer to P85 for the ISO sensitivity.
• Refer to P34 for the focus range.
• If ISO sensitivity is set to [AUTO] or
[ ] when using the flash, it will be
automatically increased to a maximum of
[ISO400].
• To avoid picture noises, we recommend
reducing the ISO sensitivity, setting
[NOISE REDUCTION] in [PICT.ADJ.] to
[HIGH] or setting the items except
[NOISE REDUCTION] to [LOW] to take
pictures. (P94)
• In motion picture mode [ ] and
[SCENERY] (P65), [NIGHT SCENERY]
(P66), [FIREWORKS] (P68),
[STARRY SKY] (P68) or [HIGH SENS.]
(P70) in scene mode, the flash setting is
fixed to Forced OFF [ ] even if the flash
is opened.
∫ Shutter speed for each flash setting
• Refer to P59 for the Aperture-priority AE,
Shutter-priority AE or Manual exposure
mode.
• There may be differences in the above
shutter speeds in scene mode.
– [NIGHT SCENERY] (P66):
8 seconds to 1/2000th of a second
– [FIREWORKS] (P68):
1/4th of a second, 2 seconds
– [STARRY SKY] (P68):
15 seconds, 30 seconds, 60 seconds
∫ Adjusting flash output
Adjust the flash output when the subject is
small or reflection ratio is extremely high or
low.
1 Press 3 ( ) several times until
[FLASH] appears and then press
2/1 to set the flash output.
• Select [0] to return to the original flash
output.
[ISO800]
Wide
80 cm (2.62 feet) to
7.4 m (24.28 feet)
Tele
60 cm (1.97 feet) to
5.6 m (18.37 feet)
[ISO1600]
Wide
1.15 m (3.77 feet) to
7.4 m (24.28 feet)
Tele
90 cm (2.95 feet) to
5.6 m (18.37 feet)
Flash setting
Shutter speed
(Sec.)
:AUTO 1/30 to 1/2000
:AUTO/
Red-eye reduction
1/30 to 1/2000
: Forced ON
: Forced ON/
Red-eye reduction
1/30 to 1/2000
: Slow sync./
Red-eye reduction
1 to 1/2000
: Forced OFF
1 to 1/2000
(In program AE
mode)
FLASH
SELECT EXIT
MENU
VQT0X92.book 49 ページ ２００６年７月４日 火曜日 午前１０時３２分