User Guide

Advanced
58
VQT0X92
– Slow sync./Red-eye reduction [ ] (P47)
– [AUTO] or [ ] in ISO sensitivity
(P85) (The ISO sensitivity is
automatically set to [ISO100] when you
switch from [AUTO] to Aperture-priority
AE or Shutter-priority AE.)
• The aperture value and the shutter speed
turn red when the exposure is not
adequate.
• We recommend using a tripod when the
shutter speed is slow.
Manual exposure
Determine the exposure by manually
setting the aperture value and the shutter
speed.
1 Rotate the front or rear dial to the
left or right to set the aperture
value or the shutter speed.
2 Press the shutter button halfway.
• The manual exposure assistance A
appears for about 10 seconds to
indicate the exposure.
• Set the aperture value and the shutter
speed again when the exposure is not
adequate.
3 Take a picture.
∫ Manual Exposure Assistance
• The manual exposure assistance is an
approximation. We recommend checking
the pictures after taking them using the
review function.
• Refer to P59 for the available aperture
values and the shutter speed.
• You cannot set the following items in
manual exposure.
– Slow sync./Red-eye reduction [ ]
(P47)
– [AUTO] or [ ] in ISO sensitivity
(P85) (The ISO sensitivity is
automatically set to [ISO100] when you
switch from [AUTO] or [ ] to Manual
exposure.)
– Exposure compensation (P52)
• The brightness of the screen may differ
from the brightness of the actual pictures.
Check the pictures using the review
function or playback mode.
• If the exposure is not adequate, the
aperture value and the shutter speed turn
red when the shutter button is pressed
halfway.
Set the aperture value.
Set the shutter speed.
ISO
100
3
1/30
F2.8
1/125
F4.0
The exposure is
adequate.
Set to faster shutter
speed or larger aperture
value.
Set to slower shutter
speed or smaller
aperture value.
1/125
F5.6
VQT0X92.book 58 ページ ２００６年７月４日 火曜日 午前１０時３２分