User Guide

Advanced
61
VQT0X92
• [MF1]: The center of the screen is
enlarged. You can adjust the focus
while determining the composition
of the whole of the screen.
• [MF2]: The whole of the screen is
enlarged. This is convenient when
adjusting the focus in Wide.
• [OFF]: The screen is not enlarged.
5 Press [MENU/SET] to close the
menu.
• You can also close the menu by
pressing the shutter button halfway.
∫ Technique for Manual focus
1 Rotate the focus ring slowly.
2 Rotate it little more.
3 Finely focus on the subject with rotating
the focus ring reversely.
∫ One shot AF
You can focus on the subject with auto
focus by selecting [MF] with the focus
switch and then press the [FOCUS] button.
This is convenient for prefocus.
∫ Prefocus
This is a technique for focusing in advance
on the point the pictures will be taken when
it is difficult to focus on the subject with
auto focus due to its quick motion. [e.g.
[PANNING] (P66) in scene mode]
This function is suitable when the distance
between the camera and the subject is
certain.
∫ Focus lock
You can fix the focus if you press
[FOCUS/AE LOCK] after focusing at the
position where you want to record the
subject. This is useful since the subject will
not go out of focus even if you rotate the
focus ring.
A: FOCUS/AE lock indication
∫ Changing the zoom area
The magnified area can be changed while
the screen is expanded using MF Assist.
This is convenient when you want to
change the focus position to take pictures.
1 Rotate the Focus ring.
AF
FOCUS
MF
AF
MACRO
3
1/60F2.8
FOCUS/
AE LOCK
A
VQT0X92.book 61 ページ ２００６年７月４日 火曜日 午前１０時３２分