Digital Camera User Manual

105
VQT2G62
Advanced (Recording pictures)
Note
• The [AF MODE] is automatically set to [Ø] when you switch the recording mode to Motion
Picture P Mode while the [AF MODE] is set to [ ].
• ISO sensitivity will be fixed to [AUTO].
• [ REC AREA] (P130) is fixed to [ ].
• [REMAINING DISP.] (P130) is fixed to [REMAINING TIME].
• As the aperture is controlled within a certain range to get an adequate exposure in this mode,
for some cases depending on the brightness of the subject, an actual aperture setting would
not be changed in response to the movement of selection cursor, so that no change on the
degree of peripheral defocus could be recognised. (For example, in dark places including in a
room, the aperture would stay at the maximum aperture value, even for both ends of the
selection cursor, so that no change on the degree of peripheral defocus could be recognised.)
• Refer to “Recording Motion Picture” on P98 for other settings, operations and information for
recording motion pictures.
DMC-GF1GN-VQT2G62_eng.book 105 ページ ２００９年８月２０日 木曜日 午前１１時７分