Digital Camera User Manual

115
VQT2G62
Advanced (Recording pictures)
Note
• Return the setting to [HOME] when the vacation is finished by performing steps 1, 2 and 3.
• If [HOME] is already set, change only the travel destination, and use.
• If you cannot find the travel destination in the areas displayed on the screen, set by the time
difference from the home area.
Using the [REC] Mode Menu
• [METERING MODE], [I.EXPOSURE], and [DIGITAL ZOOM] are common to both the [REC]
mode menu and [MOTION PICTURE] mode menu. Changing these settings in one of these
menus is reflected in other menu.
For details on [REC] mode menu settings, refer to P28.
You can select colour characteristics for your pictures from among 9 sets, much as you
would select a film for a film camera.
Select the Film Mode setting according to the conditions and the nature of the recording.
Applicable modes:
[You can only select [STANDARD] and [STANDARD] ( ) in [ ], [¿] mode.]
Note
• Refer to P82 for details.
[FILM MODE]
Item Effect
[STANDARD] (COLOUR) This is the standard setting.
[DYNAMIC] (COLOUR) The saturation and contrast of the stored colours are increased.
[NATURE] (COLOUR) Brighter red, green and blue. Enhanced beauty of nature.
[SMOOTH] (COLOUR) The contrast is lowered for smoother and clearer colour.
[NOSTALGIC] (COLOUR) Lower saturation and contrast. Reflecting passage of time.
[VIBRANT] (COLOUR) Higher saturation and contrast than dynamic.
[STANDARD] ( ) This is the standard setting.
[DYNAMIC] ( ) The contrast is increased.
[SMOOTH] ( ) Smooths the picture without losing the skin texture.
[MY FILM 1]/[MY FILM 2] The saved setting is used.
[MULTI FILM]
It will take pictures changing the type of film in accordance with
the setting every time the shutter button is pressed. (Up to 3
pictures)
DMC-GF1GN-VQT2G62_eng.book 115 ページ ２００９年８月２０日 木曜日 午前１１時７分