Digital Camera User Manual

VQT2G62
122
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P28.
ISO sensitivity settings between [ISO100] and [ISO3200] are changed for every 1/3 EV.
Applicable modes:
Note
• When the setting is changed from [1/3 EV] to [1 EV], ISO sensitivity will be set to value closest
to the value set during the [1/3 EV]. (Set value will not restore when the setting is changed back
to [1/3 EV]. It will stay as the setting selected for [1 EV].)
For details on [REC] mode menu settings, refer to P28.
Enlarging a picture with no picture quality deterioration
Applicable modes:
[OFF]/[ON]
Note
• Refer to P49 for details.
For details on [REC] mode menu settings, refer to P28.
This can enlarge subjects even more than the Optical Zoom or Extra Optical Zoom.
Applicable modes:
[OFF]/[2t]/[4t]
Note
• Refer to P49 for details.
• If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER]
(Only available when a lens that supports the Stabilizer function is attached) be set to
[MODE1].
For details on [REC] mode menu settings, refer to P28.
You can set the burst speed.
Applicable modes:
[H]/[L]
Note
• Refer to P66 for details.
[ISO INCREMENTS]
[1/3 EV]: [100]/[125]/[160]/[200]/[250]/[320]/[400]/[500]/[640]/[800]/[1000]/[1250]/
[1600]/[2000]/[2500]/[3200]
[1 EV]: [100]/[200]/[400]/[800]/[1600]/[3200]
[EX. OPT. ZOOM]
) [DIGITAL ZOOM]
[BURST RATE]
DMC-GF1GN-VQT2G62_eng.book 122 ページ ２００９年８月２０日 木曜日 午前１１時７分