Digital Camera User Manual

147
VQT2G62
Advanced (Playback)
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P28)
Note
Audio dubbing may not work properly on pictures recorded by other equipment.
Audio dubbing does not work on motion pictures, protected pictures and pictures taken with
[ ], [ ] or [ ].
Sound from motion pictures (When [REC MODE] is set to [MOTION JPEG]) or pictures
with audio recorded by this camera cannot be played back by older models of
Panasonic digital cameras (LUMIX) launched before July 2008.
B [AUDIO DUB.]
Press 2/1 to select the picture and then press
[MENU/SET] to start audio recording.
The message [OVERWRITE AUDIO DATA?] screen appears
when audio has already been recorded. Press 3 to select [YES]
and then press [MENU/SET] to start audio recording. (The
original audio is overwritten.)
Audio is recorded from the built-in microphone on the camera.
If you press [], the audio dubbing is cancelled.
Press [MENU/SET] to stop recording.
It will automatically stop after recording about 10 seconds
without pressing [MENU/SET].
Press [] to return to the menu screen.
Press [MENU/SET] to close the menu.
DMC-GF1GN-VQT2G62_eng.book 147 ページ 2009年8月20日 木曜日 午前11時7分