Digital Camera User Manual

VQT2G62
182
Others
• The LCD monitor turns off when [AUTO LCD OFF] (P31) is selected for the [ECONOMY] mode.
[This does not happen when using the AC adaptor (P167).]
If the remaining battery power is low, it may take longer for the flash to be charged, and the
time during which the LCD monitor is turned off may become longer.
>
Adjust the brightness of the LCD monitor/Optional External Viewfinder to a proper level. (P33)
• [POWER LCD] is activated. (P33)
• This occurs due to the aperture of the lens changing when the shutter button is pressed
half-way, or when the brightness of the subject changes. This is not a malfunction.
• This may occur more often when a bright lens, such as the 20 mm/F1.7 interchangeable lens
included with the DMC-GF1C, is used for recording in brightly lit outdoor environments.
• Is the LCD monitor switched off?
> Switch the display by pressing [DISPLAY]. (P56)
• Does the picture appear on the Optional External Viewfinder?
>
Switch to LCD monitor display by pressing [LVF/LCD] on the Optional External Viewfinder (P162).
• It is only displayed on the LCD monitor when the camera is connected to a PC or printer.
• This is not a malfunction.
These pixels do not affect the recorded pictures.
• In dark places, noise may appear to maintain the brightness of the LCD monitor.
• This is a characteristic of the drive system of the Optional External Viewfinder (P162) of this
unit, and it is not a malfunction. There will be no problem with the recorded image.
• You can display the pictures without being rotated when [ROTATE DISP.] (P144) is set to [OFF].
• You can rotate pictures with the [ROTATE] function. (P144)
• You can only display the pictures rotated if you use a lens (P14) that supports the Direction
Detection Function (P37) and [ROTATE DISP.] is set to [ON].
LCD monitor/optional external viewfinder
The LCD monitor turns off although the camera is turned on.
The LCD monitor/optional external viewfinder is too bright or dark.
The LCD monitor/optional external viewfinder is disrupted momentarily while recording.
The picture is not displayed on the LCD monitor.
The picture does not switch between LCD monitor and optional external
viewfinder when [LVF/LCD] is pressed on the optional external viewfinder (P162).
Black, red, blue and green dots appear on the LCD monitor.
Noise appears on the LCD monitor.
You see red, green, or blue flashes when you move your eyes in the optional
external viewfinder (P162), or when the camera is moved rapidly.
Playback
The picture being played back is not rotated, or is rotated in an unexpected
direction, when displayed.
VQT2G62~Body2_mst.fm 182 ページ ２００９年８月２５日 火曜日 午後５時１９分