Digital Camera User Manual

VQT2G62
34
Preparation
• The folder number is updated and the file number starts from 0001. (P157)
• A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting
the card (P36) after saving the data on a PC or elsewhere.
• To reset the folder number to 100, format the card first and then use this function to reset the
file number.
A reset screen for the folder number will then appear. Select [YES] to reset the folder number.
• When the [REC] mode settings are reset, data registered with [FACE RECOG.] will be also
reset, too.
• When [SETUP]/[CUSTOM MENU] menu settings are reset, the following settings are also
reset. In addition, [FAVORITE] (P137) in [PLAYBACK] mode menu is set to [OFF], and
[ROTATE DISP.] (P144) is set to [ON].
– The birthday and name
settings for [BABY1]/[BABY2] (P92) and [PET] (P93) in Scene Mode.
– The settings of [TRAVEL DATE] (P112) (departure date, return date, location)
– The [WORLD TIME] (P114) setting.
• The folder number and the clock setting are not changed.
• When [PC] is selected, the camera is connected via the “USB Mass Storage” communication
system.
• When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer
Protocol)” communication system.
• This will operate when the AV cable or HDMI mini cable (optional) is connected.
• This will work when the AV cable is connected.
v [NO.RESET]
Reset the file number of the next recording to 0001.
w [RESET]
The [REC] or [SETUP]/[CUSTOM MENU] menu settings are reset
to the initial settings.
x [USB MODE]
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
| [VIDEO OUT]
Set to match the colour television system in each country.
[NTSC]: Video output is set to NTSC system.
[PAL]: Video output is set to PAL system.
[TV ASPECT]
Set to match the type of TV.
[W]: When connecting to a 16:9 screen TV.
[X]: When connecting to a 4:3 screen TV.
DMC-GF1GN-VQT2G62_eng.book 34 ページ ２００９年８月２０日 木曜日 午前１１時７分