Digital Camera User Manual

VQT2G62

Advanced (Recording pictures)

[REC] mode:

Taking Pictures using Auto Bracket

Maximum of 7 pictures will be recorded with different exposure settings following the

Exposure Compensation range every time the shutter button is pressed.

You can select the picture with the desired exposure among different exposures.

With Auto Bracket

[STEP]: [3•1/3], [SEQUENCE]: [0/s/r]

Set the drive mode lever to [ ].

Focus on the subject and take a picture.

• If you press and hold the shutter button, the number

of pictures that you set is taken.

• The Auto Bracket indication A blinks until the

number of pictures that you set is taken.

• The picture count is reset to [0] if you change the

Auto Bracket setting, change the setting on the drive

mode lever or turn the camera off before all the

pictures that you set are taken.

∫ Changing the settings for [STEP] and [SEQUENCE] in Auto Bracket

1 Select [AUTO BRACKET] in the [REC] mode menu. (P28)

2 Press 3/4 to select [STEP] or [SEQUENCE] and then

press 1.

1st picture 2nd picture 3rd picture

d0EV j1/3 EV i1/3 EV

DMC-GF1GN-VQT2G62_eng.book 68 ページ２００９年８月２０日　木曜日　午前１１時７分