Digital Camera User Manual

VQT2G62

Advanced (Recording pictures)

∫ About the focus distance reference mark

The focus distance reference

mark is a mark used to measure

the focus distance.

Use this when taking pictures

with Manual Focus or taking

close-up pictures.

A Focus distance reference

mark (With the flash is closed)

B Focus distance reference line

C 20 cm

(When 20 mm/F1.7

lens included in DMC-GF1C

is used

)

D 30 cm

(When 14– 45 mm/

F3.5 –5.6 lens included in

DMC-GF1K is used)

• If you are taking close-up pictures

– We recommend using a tripod and the self-timer (P70).

–

The effective focus range (depth of field) is significantly narrowed. Therefore, if the distance between the

camera and the subject is changed after focusing on the subject, it may become difficult to focus on it again.

– The resolution of the periphery of the picture may decrease slightly. This is not a malfunction.

Note

• When the MF assist is started by 2, MF assist will continue to display even after 10 seconds

has past without operating the focus ring or 3/4/2/1.

• If you use the zoom function after focusing on the subject, focus on the subject again.

• The MF assist does not appear when using the digital zoom or recording motion pictures.

• Even if 2 is pressed in My Colour Mode, the MF assist screen is not displayed.

• After cancelling Power Save Mode, focus on the subject again.

[REC] mode:

Fixing the Focus and the Exposure (AF/AE Lock)

This is useful when you want to take a picture of a subject outside the AF area or the

contrast is too strong and you cannot achieve appropriate exposure.

∫ Fixing the exposure only

Align the screen with the subject.

Press and hold [AF/AE LOCK] to fix the

exposure.

A [AF/AE LOCK] button

• The aperture value and the shutter speed light.

• If you release [AF/AE LOCK], AE Lock is cancelled.

DMC-GF1GN-VQT2G62_eng.book 75 ページ２００９年８月２０日　木曜日　午前１１時７分