Digital Camera User Manual

83
VQT2G62
Advanced (Recording pictures)
Press 2/1 to select a film.
Press 3/4 to select an item and 2/1 to adjust.
• You can also use the rear dial to adjust.
• Registered settings are memorised even if the camera is
turned off.
Press 3/4 to select the [MEMORY] and then
press [MENU/SET].
• You can register 2 settings. ([MY FILM 1] and [MY FILM 2])
(After registering, the Film Mode name that was registered
previously is displayed.)
• [STANDARD] is registered in [MY FILM 1] and [MY FILM 2] at
the time of purchase.
Note
• Noise may become visible when you take pictures in dark places. To avoid picture noise, we recommend
setting [NOISE REDUCTION] towards [
_ ] or setting the items except [NOISE REDUCTION] towards [ ` ]
to take pictures.
• If you adjust a Film Mode, [_] is displayed beside the Film Mode icon on the LCD monitor/
optional external viewfinder.
• You cannot adjust [SATURATION] in the black and white settings in Film Mode.
• Film Mode cannot be adjusted in the Intelligent Auto Mode and Scene Mode.
It will take pictures changing the type of film in accordance with the setting every time the
shutter button is pressed. (Up to 3 pictures)
• You can also set from the Quick Menu. (P30)
Adjusting each Film Mode to the desired setting
Item Effect
[CONTRAST]
[r]
Increases the difference between the brightness and the
darkness in the picture.
[s]
Decreases the difference between the brightness and the
darkness in the picture.
[SHARPNESS]
[r] The picture is sharply defined.
[s] The picture is softly focused.
[SATURATION]
[r] The colours in the picture become vivid.
[s] The colours in the picture become natural.
[NOISE REDUCTION]
[r]
The noise reduction effect is enhanced. Picture resolution may
deteriorate slightly.
[s]
The noise reduction effect is reduced. You can obtain pictures
with higher resolution.
Multi Film Bracket
DMC-GF1GN-VQT2G62_eng.book 83 ページ ２００９年８月２０日 木曜日 午前１１時７分