Digital Camera User Manual

VQT2G62

Advanced (Recording pictures)

Press 2/1 to select [MULTI FILM].

Select either [MULTI FILM 1], [MULTI FILM 2], or

[MULTI FILM 3] with 3/4, and then select the film

to be set for each with 2/1.

• You can also use the rear dial to set.

• [OFF] can be selected only for [MULTI FILM 3].

Press [MENU/SET] to set.

• You can also press the shutter button halfway to set.

Focus on the subject and take a picture.

• It will continuously take pictures by keeping the shutter button pressed when it is set to

burst mode. (Up to 3 pictures)

• When using a self-timer, up to 3 pictures with set film will be taken if the shutter button is

pressed. (It will operate same as [ ] even if it is set to [ ].)

• Multi film indication ([ ]) displayed on the LCD monitor/optional external viewfinder will

flash until all pictures of preset amount are taken.

Note

• [STANDARD] is registered in [MULTI FILM 1], [MULTI FILM 2] and [OFF] is registered in

[MULTI FILM 3] at the time of purchase.

• White Balance Bracket will be disabled when the Multi Film Bracket is set.

• Motion pictures are recorded with the settings for the [MULTI FILM 1] setting.

[REC] mode: ±´

Taking pictures by specifying the aperture/

shutter speed

Set the aperture value to a higher number when you want a sharp focus background. Set

the aperture value to a lower number when you want a soft focus background.

Set the mode dial to [ ].

Rotate the rear dial to set the aperture

value.

• It will switch between aperture setting operation and

Exposure Compensation operation every time the

rear dial is pressed.

• Rotate the rear dial to display the [EXPO.METER].

(P127)

Take a picture.

[ ] Aperture-priority AE

DMC-GF1GN-VQT2G62_eng.book 84 ページ２００９年８月２０日　木曜日　午前１１時７分