Digital Camera User Manual

VQT2G62

Advanced (Recording pictures)

Note

• During Motion Picture Recording, low light settings are used, which will provide better

pictures in dimly lit rooms or at nightfall.

• Open the flash. (You can set to [ ].)

• The shutter may remain closed after taking the picture. This is due to signal processing and is

not a malfunction.

• Noise may become visible when you take pictures in dark places.

• The initial setting for [AF MODE] is [š].

This allows you to take vivid pictures of the nightscape.

∫ Technique for NIGHT SCENERY Mode

• We recommend using a tripod and the self-timer.

Note

• During Motion Picture Recording, low light settings are used, which will provide better

pictures in dimly lit rooms or at nightfall.

• The flash setting is fixed to [Œ].

• The shutter may remain closed after taking the picture. This is due to signal processing and is

not a malfunction.

• Noise may become visible when you take pictures in dark places.

Illuminations are photographed beautifully.

∫ Technique for ILLUMINATIONS Mode

• We recommend using a tripod and the self-timer.

Note

• During Motion Picture Recording, low light settings are used, which will provide better

pictures in dimly lit rooms or at nightfall.

• The flash setting is fixed to [Œ].

• The shutter may remain closed after taking the picture. This is due to signal processing and is

not a malfunction.

• Noise may become visible when you take pictures in dark places.

This takes pictures of a baby with a healthy complexion. When you use the flash, the light

from it is weaker than usual.

It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can

select to have these appear at the time of playback, or have them stamped on the

recorded image using [TEXT STAMP] (P139).

/ [NIGHT SCENERY]

[ILLUMINATIONS]

: [BABY1]/; [BABY2]

DMC-GF1GN-VQT2G62_eng.book 92 ページ２００９年８月２０日　木曜日　午前１１時７分