Digital Camera User Manual
95
VQT2G62
Advanced (Recording pictures)
Press [MENU/SET] to set.
• You can also press the shutter button halfway to set.
• Recording screen is displayed.
∫ Readjust the My Colour settings
Return to above step 2 by pressing rear dial or one of 3/4/2/1.
• [Fn BUTTON SET] (P31) or [AF MODE] (P71) cannot be set with 4/2. Make the setting with
the Quick Menu (P30).
Note
• During Motion Picture Recording, settings for My Colour Mode are used.
• My Colour settings are memorised even if the camera is turned off.
• Auto Bracket cannot be used in My Colour Mode.
• ISO sensitivity will be fixed to [AUTO].
• [I.EXPOSURE], [COLOR SPACE] can be set only when the My Colour Mode is set to
[CUSTOM].
• The following items cannot be set in My Colour Mode because the camera automatically
adjusts them to the optimal setting.
– [FILM MODE]/[FLASH]/[FLASH SYNCHRO]/[ISO LIMIT SET]
By selecting [CUSTOM], you can take pictures with colour, brightness and saturation
adjusted to desired levels.
In step 2 on page 94, select [CUSTOM] and press [MENU/SET]
Press 3/4 to select an item and 2/1 to adjust.
• You can also use the rear dial to set.
• Description of adjustment is displayed by pressing [DISPLAY]. (It will return to selection
screen when it is pressed again.)
Adjusting the custom settings to achieve desired effects
Item Adjustment contents
[COLOR]
This will adjust the colour of the
image from red light to blue light.
(11 steps in n5)
[BRIGHTNESS]
This will adjust the brightness of
the image. (11 steps in n5)
[SATURATION]
This will adjust the colour
intensity of the image from black
and white to vivid colour.
(11 steps in n5)
[RESET]
Return all settings to default
DMC-GF1GN-VQT2G62_eng.book 95 ページ 2009年8月20日 木曜日 午前11時7分