Operation Manual
- 103 -
Recording
Note
•
It will be a normal motion picture recording when recording a motion picture.
• Aperture or shutter speed can be set by touching [F] (aperture) or [SS] (shutter speed) and then
touching the exposure meter bar in the Quick Menu (P58).
• The brightness of the LCD monitor and the recorded pictures may differ. Check the pictures on
the playback screen.
• If the exposure is not adequate, the aperture value and the shutter speed turn red and blink
when the shutter button is pressed halfway.
• [‡], [ ], [ ] and [ ] for flash cannot be set.
• The [SENSITIVITY] is automatically set to [ISO100] when you switch the Recording Mode to
Manual exposure while the [SENSITIVITY] is set to [AUTO] or [ ] (Intelligent).
• If you press the shutter button fully when the shutter speed is slow, the shutter speed on the
screen counts down.
• When you use a lens with an aperture ring, the aperture ring setting takes priority.