Operation Manual

- 115 -
Recording
∫ Readjust the My Colour settings
Return to above step 2 by pressing rear dial.
Note
•
During Motion Picture Recording, settings for My Colour Mode are used.
• My Colour settings are memorised even if the camera is turned off.
• Auto Bracket cannot be used in My Colour Mode.
• ISO sensitivity will be fixed to [AUTO], and white balance will be fixed to [AWB].
• [I.DYNAMIC], [COLOR SPACE] can be set only when the My Colour Mode is set to [CUSTOM].
• The following items cannot be set in My Colour Mode because the camera automatically
adjusts them to the optimal setting.
– [FLASH]/[ISO LIMIT SET]/[PICTURE ADJUST]
∫ Set the preferred blurriness
1 Touch [ ] to display the setting screen.
2 Touch the slide bar to set.
3 Recording of pictures or motion pictures.
•
It is also possible to record a picture by touching [ ].
• Defocus Control is cancelled by touching [ ].
Note
•
Blurriness may change during motion picture recording depending on the recording conditions.
• Aperture is controlled within the range of appropriate exposure during the recording of a motion
picture, so the aperture may not actually change even when the slide bar is moved depending
on the brightness of the subject, and the blurriness may not change. (For example, blurriness
may not change for dark scenes, such as indoors, since the aperture is fixed to fully open.)
• Depending on the lens used, you may hear a sound from the lens when the Defocus Control is
used, but this is due to operation of the aperture of the lens and it is not a malfunction.
• Depending on the lens used, operational sound of the Defocus Control may be recorded during
the recording of a motion picture when the function is used.
• Depending on the lens used, use of the Defocus Control function may not be possible.
××