Operation Manual

Playback/Editing

- 162 -

∫ To print the date

After setting the number of prints, set/cancel printing with the recording date by pressing

• When you go to a photo printing store for digital printing, be sure to order the printing of the

date additionally if required.

• Depending on the photo printing store or the printer, the date may not be printed even if you set

to print the date. For further information, ask at your photo printing store or refer to the

operating instructions for the printer.

• The date cannot be printed on pictures stamped with text.

Note

•

The number of prints can be set from 0 to 999.

• With a printer supporting PictBridge, the date print settings of the printer may take precedence

so check if this is the case.

• It may not be possible to use the print settings with other equipment. In this case, cancel all the

settings, and reset the settings.

• If the file is not based on the DCF standard, the print setting cannot be set.

• [PRINT SET] cannot be set for motion pictures and pictures that were taken with the

[QUALITY] set to [ ].