Operation Manual

- 163 -
Playback/Editing
You can set protection for pictures you do not want to be deleted by mistake.
1 Select [PROTECT] on the [PLAYBACK] Mode menu. (P56)
∫ Cancelling all the [PROTECT] settings
1 Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].
2 Press 3 to select [YES] and then press [MENU/SET].
•
If you press [MENU/SET] while cancelling protection, the cancelling will stop halfway.
Note
•
The protect setting may not be effective on other equipment.
• Even if you protect pictures on a card, they will be deleted if the card is formatted.
• Even if you do not protect pictures on a card, they cannot be deleted when the card’s
Write-Protect switch is set to [LOCK].
[PROTECT]
2
Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
•
When [CANCEL] is selected, see “Cancelling all the [PROTECT] settings”.
3 Select the picture, and then press
[MENU/SET].
When [MULTI] has been selected
• Repeat these steps for each picture.
• The settings are cancelled when
[MENU/SET] is pressed again.
• Press [ ] to return to the menu
screen.
[SINGLE] [MULTI]
Press 2/1 to select
the picture.
Press 3/4/2/1 to
select the pictures.