Operation Manual

Others
- 208 -
• Is there any memory remaining on the card?
• Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
> Decrease the ISO sensitivity. (P98)
> Increase the setting for [NOISE REDUCTION] in [PICTURE ADJUST] or lower the setting
for each of the items other than [NOISE REDUCTION]. (P137)
> Take pictures in bright places.
> Set the [LONG SHTR NR] to [ON]. (P136)
• Is the [PICTURE SIZE] (P130) or the [QUALITY] (P131) set low?
• Is the [DIGITAL ZOOM] set? (P69)
Taking pictures using White Balance Bracket is not possible.
The recorded picture looks rough.
Noise appears on the picture.
Under fluorescent lighting, flicker or horizontal bars may be seen.
•
This is characteristic of MOS sensors which serve as the camera’s pickup
sensors.
This is not a malfunction.
• When you see noticeable flicker or striping while recording a motion picture,
you can reduce the flicker or striping by setting up [FLICKER RED.] (P141)
and fixing the shutter speed. It is possible to select a shutter speed from
[1/50], [1/60], [1/100], or [1/120].