Operation Manual

Preparation

- 24 -

Inserting and Removing the Card (optional)/the

Battery

• Check that this unit is turned off.

• We recommend using a Panasonic card.

Slide the release lever in the direction of

the arrow and open the card/battery

door.

• Always use genuine Panasonic batteries.

• If you use other batteries, we cannot guarantee

the quality of this product.

Battery: Insert until it is locked by the

lever A being careful about the direction

you insert it. Pull the lever A in the

direction of the arrow to remove the

battery.

Card: Push it fully until it clicks being

careful about the direction you insert it.

To remove the card, push the card until it

clicks, then pull the card out upright.

B: Do not touch the connection terminals of the

card.

•

The card may be damaged if it is not fully inserted.

1:Close the card/battery door.

2:Slide the release lever in the direction

of the arrow.

• If the card/battery door cannot be completely

closed, remove the card, check its direction and

then insert it again.

Note

•

Remove the battery after use. Store the removed battery in the battery case (supplied).

• The battery will be exhausted if left for a long period of time after being charged.

• The supplied battery is designed only for the camera. Do not use it with any other equipment.

• The battery becomes warm after using it and during and after charging. The camera also

becomes warm during use. This is not a malfunction.

• Before removing the card or battery, turn the camera off, and wait until the status indicator has

gone off completely. (Otherwise, this unit may no longer operate normally and the card itself

may be damaged or the recorded pictures may be lost.)

LOCKOPEN