Operation Manual

Basic

- 34 -

The camera automatically sets the shutter speed and the aperture value according to the

brightness of the subject.

You can take pictures with greater freedom by changing various settings in [REC] Mode

menu.

•

Set the drive mode to [ ] by pressing 4().

Set [REC] Mode to [ ].

• For details on setting up [REC] Mode, refer to P30.

Note

•

To change the setting while taking pictures, refer to “Using the [REC] Mode Menu” (P129) or

“Using the [CUSTOM] Menu” (P142).

• The shutter speed is automatically set between about 30 seconds and 1/4000th of a second in

the following cases.

– When the [SENSITIVITY] is set to [ISO100].

– When the aperture value is set to F2.5 [when the interchangeable lens (H-H014) is attached].

– When the aperture value is set to F3.5 [when the interchangeable lens (H-FS014042) is

attached].

Taking Pictures with Your Favourite Settings (Programme AE Mode)

Press the shutter button halfway to focus.

A Aperture value

B Shutter speed

• Aperture value and shutter speed are displayed. (It

will flash in red if the correct exposure is not achieved,

except when set to flash.)

• You will not be able to take a picture until the

focus is set, since the [FOCUS PRIORITY] (P144)

is set initially to [ON].

Press the shutter button fully (push it in

further), and take the picture.

• The access indication lights (P25) red when pictures

are being recorded on the card.