Operation Manual

Basic
- 36 -
In Programme AE Mode, you can change the preset
aperture value and shutter speed without changing the
exposure. This is called Programme Shift.
You can make the background more blurred by
decreasing the aperture value or record a moving subject
more dynamically by slowing the shutter speed when
taking a picture in Programme AE Mode.
1 Press the shutter button halfway and display the
aperture value and shutter speed value on the screen.
2 While the values are displayed (about 10 seconds), perform the Programme
Shift by rotating the rear dial.
•
It will switch between Programme Shift operation and Exposure Compensation operation (P78)
every time the rear dial is pressed while the values are displayed.
• Rotate the rear dial to display the [EXPO.METER] B. (P143)
• The Programme Shift indication A appears on the screen when Programme Shift is activated.
• To cancel Programme Shift, turn the camera off or rotate the rear dial until the Programme Shift
indication disappears.
∫ Example of Programme Shift
(When the interchangeable lens (H-H014) is used)
Note
•
If the exposure is not adequate when the shutter button is pressed halfway, the aperture value
and shutter speed turn red and blink.
• Programme Shift is cancelled and the camera returns to normal Programme AE Mode if more
than 10 seconds pass after Programme Shift is activated. However, the Programme Shift
setting is memorised.
• Depending on the brightness of the subject, Programme Shift may not be activated.
• Programme Shift is not possible when the [SENSITIVITY] is set to [ ].
Programme Shift
(A): Aperture value
(B): Shutter speed
1 Programme Shift amount
2 Programme Shift line chart
3 Programme Shift limit
A B
(A)
(B)
4 2 1 1
/
2
1
/
4
1
/
8
1
/
15
1
/
30
1
/
60
1
/
125
1
/
250
1
/
500
1
/
1000
1
/
2000
1
/
4000
15
16
17
18
19
20
2
2.8
4
5.6
8
11
16
22
−1
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
（Ev）