Operation Manual

- 65 -
Basic
• This will work when the HDMI mini cable (optional) is connected.
• Refer to P167 for the method to playback 3D pictures in 3D.
• Calibration is not done if correct position is not touched. Touch the [i] mark again.
• If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[3D PLAYBACK]
Setup the output method for 3D pictures.
[]: Set when connecting to a 3D compatible television.
[]: Set when connecting to a television not compatible
with 3D.
Set this when you would like to view pictures in 2D
(conventional image) on a 3D compatible television.
[CALIBRATION]
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1 Press [MENU/SET].
2 Touch the orange [r] mark
displayed on the screen in order
with the stylus pen (supplied)
(5 places).
•
A message is displayed once the
position is set.
3 Press [MENU/SET] to finish.
~ [LANGUAGE]
Set the language displayed on the screen.